Installation Process For Zest Panels

Panels Fitted To Flat Dry Walls Or Ceilings

Installation process for Zest Wall Panels:`

Step 1

Select and fit trims required.

Step 2

Select the first panel and cut to length. Remember, if the last panel in the run is on a feature corner, you could remove more of the first panel to finish with a complete panel.

Step 3

Painted surfaces should be suitably keyed before applying any adhesive. 

Step 4

Apply adhesive evenly to the surface of the wall, or rear of panel, in a zigzag pattern. 

Step 5

Starting from the left, fit the panel into the trim using a spirit level to ensure the panel is vertical.

Step 6

Make sure the panel is securely bonded to the wall. 

Step 7

When fixing to tiled walls use a neutral cure silicone or solvent free/moisture cure adhesive. 

*Please always refer to the installation guide.