Skip to content Skip to footer

Where to fit Zest wall panels

To walls and shower cubicles (with power shower) and steam rooms up to 60u00b0C.
To damp or damaged walls by fitting 38mm x 19mm battens horizontally at 400mm centres with screws into wall plugs, and a breathable membrane is recommended.
To a wall with a clean flat surface using adhesive (no battening required).
To a wall with existing ceramic tiles using a moisture cure or solvent free adhesive (tiles do not need to be removed).
Zest can withstand temperatures up to 60u00baC. Panels can be fitted behind hot water pipes and radiators and behind a gas or electric hob if a piece of heat resistant glass is installed between the product and the hob using 10mm spacers and mirror screws.

Important

Check all boards are from the same batch to ensure uniform colour within a room. nStore flat and do not expose to direct sunlight/UV

Download the Brochure

Unique and inspiring, Zest Wall Panels offer a wide variety of designs, colours and sizes for any room in your home or project.